Dakusan's Domain Forum

Main Site Discussion => Posts => Topic started by: Dakusan on April 08, 2019, 09:31:09 PM

Title: Babyface Pro Volume Modification via Mousewheel
Post by: Dakusan on April 08, 2019, 09:31:09 PM
Original post for Babyface Pro Volume Modification via Mousewheel can be found at https://www.castledragmire.com/Posts/Babyface_Pro_Volume_Modification_via_Mousewheel.
Originally posted on: 04/09/19

Part of my workstation’s audio setup uses the RME Babyface Pro. Until the most recent update of their software, the built-in Window’s sound’s master volume for the device was ignored. So while this script isn’t as important as before, I still find it very useful. So the following is an AutoHotkey script which modifies the master volume in the TotalMix FX window via the mousewheel (when alt+ctrl is held down). This expects the TotalMix FX window to be sized as small as it can, and to have a channel selected for the control room’s Main Out. It should look like this:

TotalMix FX Sized For Volume Modification

The script is as follows:

;Function to create lparam/wparam for SendMessage
CalculatePARAM(w1, w2)
{
   IfLess, w1, 0
      w1 := 65535 + w1 + 1
   IfLess, w2, 0
      w2 := 65535 + w2 + 1

   return (w2<<16 | w1)
}

;Send a mouse wheel action to a window
SendMouseWheel(WindowHWND, Steps, XPos, YPos)
{
   ;Constants
   WM_MOUSEWHEEL := 0x20A
   WheelStepAmount := 120

   ;Calculate and execute the message
   WinGetPos, ScreenX, ScreenY,,, ahk_id %WindowHWND%
   wparam := CalculatePARAM(0, Steps*WheelStepAmount)
   lparam := CalculatePARAM(XPos+ScreenX, YPos+ScreenY)
   SendMessage, %WM_MOUSEWHEEL%, %wparam%, %lparam%,, ahk_id %WindowHWND%
}

^!WheelUp::
ControlGet, ControlHWND, Hwnd,,AfxFrameOrView100s1,RME TotalMix
if ControlHWND
   SendMouseWheel(ControlHWND, 1, 36, 428)
return

^!WheelDown::
ControlGet, ControlHWND, Hwnd,,AfxFrameOrView100s1,RME TotalMix
if ControlHWND
   SendMouseWheel(ControlHWND, -1, 36, 428)
return